|
|
Post by shortrun on Sept 10, 2015 18:29:25 GMT -5
What are the best settings for a hummingbird 678c hd di for locating stripers? Thanks for the help.
|
|
|
|
Post by drag4striper on Sept 10, 2015 19:30:32 GMT -5
I have a 788ci and adjust the sensitivity and chart speed very often. Don't know if this will help. Here is how mine is set. Sensitivity @ 18 below 7 mph adjust lower at faster speeds lower range around @ 100 ft palette # 1 switch fire @ max mode bottom view @ structure Id on transducer set @ quad beam , in this mode the two outside beams are 455 khz zoom width @ wide beam select @ 200/83khz center two beams |
|
